公司名称：胶水公司

HYSOL KL-G450H/HYSOL KL-G450HS/HYSOL KL-G450HCJ/HYSOL KL-G450H (CJ) 电子胶水/塑封胶水/汉高乐泰胶水/塑封方案

技术服务热线：021-51693135 / 021-22818476

乐泰 HYSOL KL G450H/HYSOL KL-G450HS/HYSOL KL-G450HCJ/HYSOL KL-G450H (CJ) epoxy molding compoundcontains no bromine, antimony or phosphorus flame retardant.
This material is designed to achieve JEDEC Level 3requirements, at 260°C reflow temperature for a QFP package.乐泰 HYSOL KL G450H meets UL 94 V-0 Flammability at3.175mm thickness.
TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 30Spiral Flow, @ 175°C, cm 110Shelf Life:@ 5oC, months 12Bromide (Br) <5 Electrical Properties:Volume Resistivity, ohms-cm, 250 volts:@ 25oC 19×1015GENERAL INFORMATIONFor safe handling information on this product, consult theMaterial Safety Data Sheet, (MSDS).
This product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selected asa sealant for chlorine or other strong oxidizing materials.
Not for product specificationsThe technical data contained herein are intended as referenceonly.
Please contact your local quality department forassistance and recommendations on specifications for thisproduct.
StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product container labeling.
Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers.
After removal from coldstorage, the material MUST be allowed to come to room temperature, in the sealed container, to avoid moisturecontamination.
The suggested waiting time for a standard 15kg carton box is 24 hours.

乐泰 HYSOL KL G450H / HYSOL KL-G450HS / HYSOL KL-G450HCJ / HYSOL KL-G450H（CJ）环氧树脂模塑料不含溴，锑或磷阻燃剂。
该材料旨在实现JEDEC 3级要求，在260°C回流温度下进行QFP封装.乐泰 HYSOL KL G450H符合UL 94 V-0可燃性，厚度为3.7575mm。
固化材料的特性特性时间@ 175°C，秒30螺旋流量，@ 175°C，cm 110Shelf寿命：@5oC，月份溴溴化物（Br）<5电气性能：体积电阻率，欧姆 - 厘米，250伏特：@25oC191015GENERAL信息有关本产品的安全处理信息，请参阅材料安全数据（MSDS）。
该产品不