公司名称：胶水公司

HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/HYSOL FP4470电子组装/工业胶水/电子组装胶水/工业用胶

技术服务热线：021-51693135 / 021-22818476

乐泰 ECCOBOND FP4470 features excellent flow propertiesallowing the material to penetrate fine pitch wires and deep cavitieswithout entrapping voids. This product can withstand solder reflow after
being exposed to JEDEC Level 2A (60°C/60% RH, 120 hours)
preconditioning.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, Brookfield - RVF, 25 °C, mPa•s (cP):
Spindle 6, speed 10 rpm 42,000
Specific Gravity @ 25 °C 1.8
Pot Life @ 25oC, days 3
Shelf Life @ -40°C, days 274
Flash Point - See SDS
TYPICAL CURING PERFORMANCE
Gel Time
12 minutes @ 121°C
Cure Schedule
30 minutes @ 125°C + 90 minutes @ 165°C
乐泰 ECCOBOND FP4470 should be dispensed onto a
substrate warmed to approximately 75°C.
The above cure profiles are guideline recommendations. Cure
conditions (time and temperature) may vary based on customers'
experience and their application requirements, as well as customer
curing equipment, oven loading and actual oven temperatures. STORAGE:
Store product in the unopened container in a dry location. Storage
information may be indicated on the product container labeling.
Optimal Storage: -40°C. Storage below -40°C or greater than -40
°C can adversely affect product properties. 乐泰 ECCOBOND FP4470具有出色的流动特性
允许材料穿透细间距线和深空腔
没有截留空隙。本产品可以耐受回流焊
暴露于JEDEC 2A级（60°C / 60％RH，120小时）
预处理
固化材料的典型特性
粘度，Brookfield - RVF，25℃，mPa•s（cP）：
主轴6，转速10 rpm 42,000
25°C时的比重1.8
25℃的天气，第3天
保质期@ -40°C，天274
闪点 - 见SDS
典型的固化性能
凝胶时间
12分钟