公司名称：胶水公司

乐泰 3736电子组装/工业胶水/电子组装胶水/工业用胶

技术服务热线：021-51693135 / 021-22818476

乐泰®3736™ is a UV and visible light curable coating
resin. This product is specially formulated for moisture
protection on COG of LCD module or terminals of TAB
mounts. Its high flexibility and good moisture resistance
provide enhanced protection.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.03
Flash Point - See MSDS
Viscosity @ 25°C, mPa•s (cP):
Haake viscometer, PK1, 2°:
Constant shear rate @ 129 s
-1 500
TYPICAL CURING PERFORMANCE
乐泰®3736™ cures when exposed to UV radiation of 365
nm. To obtain a full cure on surfaces exposed to air, radiation
at 220 to 260nm is required. The cure rate and ultimate depth
of cure will depend on the UV intensity, the spectral distribution
of the light source, the exposure time and the light
transmittance of the substrates.
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties
乐泰®
3736™是紫外线和可见光固化涂层
树脂。本产品是专门为潮湿而配制的
保护LCD模块或TAB端子的COG
安装。其灵活性高，防潮性好
提供增强的保护。
固化材料的典型特性
比重@ 25°C 1.03
闪点 - 参见MSDS
25℃下的粘度，mPa•s（cP）：
Haake粘度计，PK1，2°：
恒定剪切速率@ 129 s
-1 500
典型的固化性能
乐泰®
3736 TM暴露于365的紫外线辐射下固化
nm。在暴露于空气，辐射的表面上获得完全固化
需要220至260nm。治愈率和*极深度
的固化将取决于紫外线强度，光谱分布
的光源，曝光时间和光线
基板的透光率。
存储
将产品存放在未开封的容器中，干燥处。
存储信息可能会在产品容器上显示
标签。
*佳储存温度：8°C至21°C。储存温度低于8°C或
大于28°C可能会对产品性能产生不利影响