公司名称：胶水公司

MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/MACROMELT OM678电子组装/工业胶水/电子组装胶水/工业用胶

技术服务热线：021-51693135 / 021-22818476

TECHNOMELT PA 678 high performance thermoplastic polyamide
is designed to meet low pressure molding process requirements. This
product can be processed at low processing pressure due to its low
viscosity, allowing encapsulation of fragile components without
damage. This material produces no toxic fumes in process and
provides a good balance of low and high temperature performance.
LIQUID-STATE TYPICAL PROPERTIES
Viscosity @ 210 °C, mPa∙s (cP) 3,400
Density , g/cm3 0.98
Softening Point, °C 187
TYPICAL PROCESS DATA
Handling:
Molding Temperature, °C 210 to 240
TECHNOMELT PA 678 has been formulated to provide the best
possible moldability and as wide a molding latitude as possible. Much
of the final molding parameters will be determined by the mold design.
Although molding and curing conditions will vary from situation to
situation, recommended starting ranges are shown above. Storage
Store product in the unopened container in a dry location. Storage
information may be indicated on the product container labeling.
TECHNOMELT PA 678高性能热塑性聚酰胺
旨在满足低压成型工艺要求。这个
产品可以在低加工压力下进行处理，因为其低
粘度，允许无脆性组分的包封
损伤。这种材料在生产过程中不产生有毒的烟雾
提供良好的低温和高温性