公司名称：胶水公司

ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/ECCOBOND C850-6L电子组装/工业胶水/电子组装胶水/工业用胶

技术服务热线：021-51693135 / 021-22818476

ECCOBOND C850-6L electrically conductive adhesive isdesigned for LED or die attach applications.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity Brookfield, mPa (cP)
5 rpm, # TE
60,000
Specific Gravity @ 25oC 3.2
Shelf Life:
@ -20 to 0oC, months 6
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Cure Schedule
1 hour @ 120°C or
30 minutes @ 150°C
The above cure profiles are guideline recommendations. Cureconditions (time and temperature) may vary based oncustomers' experience and their application requirements, aswell as customer curing equipment, oven loading and actualoven temperatures. Storage Store product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.
Optimal Storage: 0 to 25°C. Storage greater than or below0 to 25°C can adversely affect product properties. ECCOBOND C850-6L导电胶是专为LED或贴片应用而设计。
固化材料的典型特性
粘度布鲁克菲尔德，mPa（cP）
5 rpm，＃TE
60,000
25oC比重3.2
保质期：
@ -20至0oC，月6
闪点 - 参见MSDS
典型的固化性能
治愈时间表
120°C或1小时
在150°C 30分钟
以上治疗方案是指导性建议。治愈条件（时间和温度）可能会有所不同客户的经验和应用要求以及客户固化设备，烤箱装载和实际烘箱温度。存储将产品存放在未开封的容器中，干燥处。存储信息可能会在产品容器上显示标签。
*佳储存：0至25°C。存储大于或低于0至25°C可能会对产品性能产生不利影响。